KJS40 Steel Sheet Metal Plate Slitting Line
  • KJS40 Steel Sheet Metal Plate Slitting Line
  • KJS40 Steel Sheet Metal Plate Slitting Line
  • KJS40 Steel Sheet Metal Plate Slitting Line
  • KJS40 Steel Sheet Metal Plate Slitting Line

KJS40 Steel Sheet Metal Plate Slitting Line

Model No.: KJS40

KJS40 series NC precision slitting production line is for material 2-16 mm thickness, 2500mm width of coil, with speed 40m/min, max 30 pieces cutting strips.
Comments: Slitting line machine not only for the steel serivice cutting industry, but also for the pipe industry. A lot of customers make the pipes before slitting the large coil to the small size of coils.

Get a quote

I. Introduction of the KJS40 Steel Sheet Metal Plate Slitting Line
       KJS40 series heavy gage precision slitting production line is developed by KINGJIME for some customers to cut max. 8,12,16mm thick, from max.1250mm to 2500mm width of coil .
 The machine can do uncoiling,straightening, slitting and recoiling works. The machine consists of coil car, dual-cone uncoiler, coil guide,straightener and gear box , slitting machine and gear box , scrap winder, tension unit, recoiler and asisting support, push-off, hydraulic system, electrical system and so on. The heavy gage series slitting production line can display enterprise powerful capacity. 
     The whole line is controlled by PLC with computer display.The information of order amount, cutting strips and line speed can be input to the PLC systems. When the need shearing length is reached, the machine can cut automatically.The line speed can be adjusted. This line is highly automatic with precision measuring, efficient production, reliable performance, easy operation and maintenance.
II. Technical Data
              Model            Sheet Thickness
(mm)
Coil Width
(mm)
No.of Slitting 公差
(mm)    
Line speed
(m/min)
Coil Weight(t)
KJS40-8*1600 2-8 400-1600 15-6 ±0.1 0-40 15、20、25
KJS40-8*2000 2-8 500-2000 15-6 ±0.1 0-40 15、20、25
KJS40-8*2200 2-8 600-2200 15-6 ±0.1 0-40 15、20、25
KJS40-10*1600 3-10 400-1600 15-6 ±0.1 0-40 15、20、25
KJS40-10*2000 3-10 500-2000 15-6 ±0.1 0-40 15、20、25
KJS40-10*2200 3-10 600-2200 15-6 ±0.1 0-40 15、20、25
KJS40-12*1600 3-12 400-1600 15-5 ±0.1 0-40 15、20、25
KJS40-12*2000 3-12 500-2000 15-5 ±0.1 0-40 15、20、25
KJS40-12*2200 3-12 600-2200 15-5 ±0.1 0-40 15、20、25
KJS40-12*2500 3-12 600-2500 15-5 ±0.1 0-40 15、20、25
KJS40-14*1600 4-14 400-1600 12-5 ±0.1 0-40 20、25、30
KJS40-14*2000 4-14 500-2000 12-5 ±0.1 0-40 20、25、30
KJS40-14*2200 4-14 600-2200 12-5 ±0.1 0-40 20、25、30
KJS40-14*2500 4-14 600-2500 12-5 ±0.1 0-40 20、25、30
KJS40-16*1600 4-16 400-1600 12-4 ±0.1 0-40 20、25、30
KJS40-16*2000 4-16 500-2000 12-4 ±0.1 0-40 20、25、30
KJS40-16*2200 4-16 600-2200 12-4 ±0.1 0-40 20、25、30
KJS40-16*2500 4-16 600-2500 12-4 ±0.1 0-40 20、25、30
III. Machine parts in the working line
1. coil car
2. decoiler
3. peeler entry table
4. Straightener.
5. Shearing machine
6. loop table
7. coil guide and pinch roll
8. Slitting machine
9. scrap winder (both sides)
10. Loop table
11. separator and tension table
12. Deflector roll and exit threading table
13. Recoiler
14. Over arm separator in the recoiler.
15. Exit coil car for recoiler
16. Hydraulic system
17. pneumatic system
18. electrical control system

IV. Layout
heavy duty slitting lines