A Slitting Line is used to break mother coils down into baby coils of a specific width and or weight. A Slitting Line will uncoil a mother coil and slit it to a specified width(s).
Coil thickness: 0.2-20 mm
A Slitting Line is used to break mother coils down into baby coils of a specific width and or weight. A Slitting Line will uncoil a mother coil and slit it to a specified width(s).
Coil thickness: 0.2-20 mm
NC Slitting Line Machine For Processing Steel Sheet and Metal Plate
I. Introduction of the slitting line
A Slitting Line is used to break mother coils down into baby coils of a specific width and or weight. A Slitting Line will uncoil a mother coil and slit it to a specified width(s). The slit coils sometimes referred to as strips are then recoiled. The finished slit coils produced by Slitting Line are used in a wide variety of applications such as roll forming, stamping operations, and pipe making. When considering a Slitting Line and the proper line configuration for your application, there are several variables you should consider: the thickness of material, the type of material, the weight of the coils to be produced, as well as annual volume to be processed all influence the line configuration and capabilities required for a successful installation.
Slitting line machine not only for the steel serivice cutting industry, but also for the pipe industry. A lot of customers make the pipes before slitting the large coil to the small size of coils.
Slitting line can do uncoiling, slitting and recoiling works, make coil steel to any needed width coil steel. It mainly includes coil car, uncoiler, coil guide, slitting machine, scrap winder, tension unit, recoiler and coil car, hydraulic system, Etc. It mainly used in coil or hot rolling carbon steel, silicon steel and all the other kinds of metal materials with surface spreading.
This line can be adjusted to do recoiling or dividing work to meet customer’s demand.
II. Technical data
|
main material |
all kinds of metal coil |
||||
|
coil weight(ton) |
3,5,10,15,20,25,30,40 |
||||
|
coil width(mm) |
650,850,1000,1300,1600,2000,2500 |
||||
|
coil thickness(mm) |
0.25-2,0.4-3,0.5-4,1-6,2-8,3-10,4-16 |
||||
|
coil I.D(mm): |
508mm (470-610) |
||||
|
coil O.D (mm): |
1200-1800 |
||||
|
line speed(m/min) |
0-40,0-60,10-120,20-180 |
||||
|
number of slitting |
5~30 |
||||
|
Cutting accuracy(mm/m) |
0.05 |
||||
|
voltage/ HZ |
380/440V-50HZ 660V-60HZ |
||||
|
capacity load |
2500-5500 tons/ month |
||||
III. Machine parts in the working line
1. coil car
2. decoiler
3. peeler entry table
4. Straightener.
5. Shearing machine
6. loop table
7. coil guide and pinch roll
8. Slitting machine
9. scrap winder (both sides)
10. Loop table
11. separator and tension table
12. Deflector roll and exit threading table
13. Recoiler
14. Over arm separator in the recoiler.
15. Exit coil car for recoiler
16. Hydraulic system
17. pneumatic system
18. electrical control system
.JPG)
Please feel free to contact Mr. Joe Cheng with material details which is needed for quotation as below
1, Coil thickness (mm)
2, Coil width (mm)
3, MAX coil weight (kg)
4, Main material
5, MAX length after cutting
