Language
LNCF12 Series 3 in 1 Decoiler Straightener And Feeder
  • LNCF12 Series 3 in 1 Decoiler Straightener And Feeder
  • LNCF12 Series 3 in 1 Decoiler Straightener And Feeder
  • LNCF12 Series 3 in 1 Decoiler Straightener And Feeder

LNCF12 Series 3 in 1 Decoiler Straightener And Feeder

Model No.: TNCF12

LNCF12 3 in 1 NC Servo Feeder Straightener & Uncoiler is for material 1.2-12MM thickness, 75-1600MM width of coil, with speed 20M/Min.
Comments: NC Servo feeding. Operating with Computerize Numerical Control by PLC program from MITSUBISHI made in Japan. The electrical parts from YASKAWA made in Japan including Servo motor, driver, encoder, interface screen and so on.

Get a quote

LNCF12 Series 3 in 1 Decoiler Straightener And Feeder


I.Feature
1.NC Servo feeding. Operating with Computerize Numerical Control by PLC program from MITSUBISHI made in Japan. The electrical parts from YASKAWA made in Japan including Servo motor, driver, encoder, interface screen and so on.
2.High precision feeding: to meet the coming of hi-tech industry, controlled by computer closed circuit feedback system to keep precision degree within +/-0.15mm
3.Feeding function: input 20 sets of different feed length, each group provides 999 times for punching or cutting to satisfy processing of special products.
4.High efficiency release device, match with adjustment of signal from the cutter or press machine through cable wire.
5.Setting of feed length: directly input feed length on the control plate, and then it can reach needed distance, feed length max 9999.99mm. speed max 40m/min

II. Straightening feature.

1. Upper roller adjustment by digital watch.
2. Coil width adjusted by double handle wheel with precise scre word.
3. Pass line can be adjusted by the lifter driven by motor.
4.Coil side guide use one set hollow rolls mechanical back gauge device.
5. Pinch roll and straightener roll material:high-strength alloy bearing steel withhard chrome plating.
6.Hydraulic coil arm device.
7. Motorized Snuber roll.
8.Hydraulic guider.
9. Hydraulic peeler table.
10. Mitsubishi PLC control feeding program from Japan.
11. Feed accuracy controlled by Japan YASKAWA servo motor with precise planetary reducer.

III.Specification :
 
model
 LNCF12-400 LNCF12-600 LNCF12-800 LNCF12-1000 LNCF12-1300 LNCF12-1600
max.material width(mm) 400 600 800 1000 1300 1600
material thickness(mm) 1.2-12mm
coil weight(KG) 5000/8000 8000/10000/15000
coil inner Diameter(mm) 610mm
coil outer diameter(mm) 1500mm
expansion method hydraulic expansion
uncoiler sensor Photoelectric sensor
coil car optional
shear optional
Speed(m/min) 20m/min


IV.Straightening Performance:

 

 

Contact Us

KingJime Machine Limited.All rights reserved 2018 © Made by Digood