High Precision And High Speed Belt Tension Slitting Line
I.Introduction of KJS180 series belt tension Slitting line
KJS180 series NC precision slitting production line is for material 3mm thick,max.1600mm width of coil, with speed 180m/min,cutting strips 30 pieces . This line is the best choice for coil procssing center user .The machine consists of coil car ,uncoiler ,straightener ,loop Ⅰ,slitting machine,scrap winder, loop Ⅱ,belt bridlle ,recoiler ,asisting support ,exit coil car ,hydraulic system ,electrical system and so on.
| model | thickness （mm） |
width(mm) | slit number PCS | Accuracy(mm) | Speed (m/min) |
weight(t) |
| KJS180-1*650 | 0.2-1 | 150-650 | 30-8 | ±0.05 | 0-180 | 3、5 |
| KJS180-1*850 | 0.2-1 | 300-850 | 30-8 | ±0.05 | 0-180 | 5、10 |
| KJS180-1*1050 | 0.2-1 | 300-1050 | 30-8 | ±0.05 | 0-180 | 5、10 |
| KJS180-1*1300 | 0.2-1 | 400-1300 | 30-8 | ±0.05 | 0-180 | 10、15 |
| KJS180-2*650 | 0.3-2 | 150-650 | 30-8 | ±0.05 | 0-180 | 3、5 |
| KJS180-2*850 | 0.3-2 | 300-850 | 30-8 | ±0.05 | 0-180 | 5、10 |
| KJS180-2*1050 | 0.3-2 | 300-1050 | 30-8 | ±0.05 | 0-180 | 5、10 |
| KJS180-2*1300 | 0.3-2 | 400-1300 | 30-8 | ±0.05 | 0-180 | 10、15 |
| KJS180-2*1600 | 0.3-2 | 400-1600 | 30-8 | ±0.05 | 0-180 | 15、20 |
| KJS180-2*2000 | 0.3-2 | 500-2000 | 30-8 | ±0.05 | 0-180 | 15、20 |
| KJS180-3*1300 | 0.4-3 | 400-1300 | 30-6 | ±0.05 | 0-180 | 10、15 |
| KJS180-3*1600 | 0.4-3 | 400-1600 | 30-6 | ±0.05 | 0-180 | 15、20 |
III.Slitting machine main components :
1.Coil car
2.Decoiler
3.Peeler entry table
4.Straightener.
5.Shearing machine
6.Loop table
7.Coil guide and pinch roll
8.Slitting machine
9.Scrap winder (both sides)
10.Loop table
11.Separator and tension table
12.Deflector roll and exit threading table
13.Recoiler
14.Over arm separator in the recoiler.
15.Exit coil car for recoiler
16.Hydraulic system
17.Pneumatic system
18.Electrical control system
